Electrical Jumper Wires
Electrical Jumper wires are just pieces of wire with alligator clips on the ends used to transfer power from one spot to another. You can buy them from electronic stores or online for very cheap or make your own like the ones above. The jumper wires in the picture above are about 5 feet long and made with 18 gauge wire, but we recommend that you have a number of them in different sizes (for motorcycles a range from 14 gauge to 22 should do just fine). The alligator clips were soldered on the ends and sealed with heat shrink tubing. Below are some options if you just want to go ahead and order some.